Mes: septiembre 2020

DUBLIN, Sept. 1, 2020 /PRNewswire/ — The «Fighter Aircraft Market – Growth, Trends and Forecast (2020-2025)» report has been added to ResearchAndMarkets.com’s offering.

The global fighter aircraft market is estimated to register a CAGR of over 4% during the forecast period (2020-2025).

As the countries are striving to enhance their aerial combat capabilities, several nations are upgrading their existing fighter jets, or are replacing their aging fleet with newer generation aircraft, with advanced features.

Technology advancements in stealth and precision weapons are further supporting the development of the fighter aircraft market, since, every nation want their combat capabilities to be up-to-date.

However, the development and adoption of unmanned aerial vehicles can act as a restraint for fighter jets. Budget constraints can also prevent few smaller countries to opt for next-generation fighter jets, which can hinder the market growth during the forecast period.

Key Market Trends

Conventional Take-off and Landing Projected to Grow at the Highest CAGR

Currently, conventional take-off and landing has the highest share of all the segments. Conventional take-off and landing refer to a method, in which an aircraft accelerates along the ground, until they have enough power for take-off. Most of the fighter aircraft, being currently manufactured, are based on a conventional take-off and landing configuration. Currently, there are various programs, which are going on, in terms of conventional take-off and landing fighter aircraft.

Under the F-35 Joint Strike Fighter (JSF) Program, the US Department of Defense (DOD) is planning to acquire more than 2,400 new generation F-35s. Of the total acquisition, more than 1,700 aircraft shall be F-35A. Moreover, the F-35A is expected to replace the F-16 and the F-15 fighter aircraft. Singapore is also planning to replace the country’s aging F-16 fighter jets, with the F-35 Joint Strike Fighter. Thus, upcoming developments are expected to increase the focus on this segment, and this may be the reason for its expected high CAGR.

North America Expected to Witness the Highest Growth Between 2020-2025

In the fighter aircraft market, North America is expected to experience the highest growth. Various developments in the North American region, in terms of fighter aircraft, are expected to lead to its high growth. The US Air Force, since the end of the Second World War, has been regarded as the supreme air force of the world. Currently, the United States has over 2,000 fighter aircraft, and the US Department of Defense is now focused on upgrading its fighter aircraft fleet.

Additionally, the USAF (the United States Air Force) plans to increase its fighter aircraft squadron from 55 to 65 in the coming years, in order to deal with the growing military might of China and Russia. In 2018, Lockheed Martin announced its plan to develop an updated version of its F-22 Raptor fighter aircraft for the USAF. Lockheed Martin plans to combine the top features of the F-35 and the F-22 aircraft into the F-22 Raptor Hybrid aircraft. Thus, various ongoing developments, in terms of fighter aircraft, are expected to lead its growth in North America, in the near future.

Competitive Landscape

Various players, such as Lockheed Martin Corporation, The Boeing Company, Airbus SE, Dassault Aviation, and Hindustan Aeronautics Limited, hold the significant market share, as of December 2019. Various initiatives, as well as product innovations, which are being done by companies, have led them to strengthen their presence in the market. The Boeing Company, Airbus Defence and Space, Lockheed Martin, and Dassault Aviation, hold the major market share.

In 2019, Dassault Aviation reported the first delivery of the Rafale fighter aircraft, for Qatar. The first Rafale delivery happened on schedule after a contract was signed between Qatar and Dassault Aviation for 24 Rafale fighter aircraft, in order to equip for the Qatari Air Force.

Key Topics Covered

1 INTRODUCTION
1.1 Study Assumptions
1.2 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET DYNAMICS
4.1 Market Overview
4.2 Market Drivers
4.3 Market Restraints
4.4 Porter’s Five Forces Analysis

5 MARKET SEGMENTATION
5.1 Take-off and Landing
5.1.1 Conventional Take-off and Landing
5.1.2 Short Take-off and Landing
5.1.3 Vertical Take-off and Landing
5.2 Geography
5.2.1 North America
5.2.2 Latin America
5.2.3 Asia-Pacific
5.2.4 Europe
5.2.5 Middle-East & Africa

6 COMPETITIVE LANDSCAPE
6.1 Vendor Market Share
6.2 Company Profiles
6.2.1 Lockheed Martin Corporation
6.2.2 Saab AB
6.2.3 The Boeing Company
6.2.4 Airbus SE
6.2.5 United Aircraft Corporation
6.2.6 Chengdu Aircraft Industrial (Group) Co. Ltd.
6.2.7 Hindustan Aeronautics Limited
6.2.8 BAE Systems plc
6.2.9 Dassault Aviation SA

7 MARKET OPPORTUNITIES AND FUTURE TRENDS

For more information about this report visit https://www.researchandmarkets.com/r/24nrgd

Research and Markets also offers Custom Research services providing focused, comprehensive and tailored research.

Media Contact:

Research and Markets
Laura Wood, Senior Manager
press@researchandmarkets.com

For E.S.T Office Hours Call +1-917-300-0470
For U.S./CAN Toll Free Call +1-800-526-8630
For GMT Office Hours Call +353-1-416-8900

U.S. Fax: 646-607-1907
Fax (outside U.S.): +353-1-481-1716

View original content:http://www.prnewswire.com/news-releases/global-fighter-aircraft-industry-report-2020-2025–includes-profiles-of-lockheed-martin-saab-boeing-airbus-united-aircraft-corporation-and-more-301121866.html

SOURCE Research and Markets

DUBLIN, Sept. 1, 2020 /PRNewswire/ — The «Automotive Parts Magnesium Die Casting Market – Growth, Trends, and Forecasts (2020-2025)» report has been added to ResearchAndMarkets.com’s offering.

The global automotive parts magnesium die casting market is expected to register a CAGR of 9.55% during the forecast period.

The market studied is primarily driven by the expanding automotive market, increasing penetration of magnesium die casting parts in industrial machinery, growing electric mobility, and the employment of magnesium cast for powertrain and housing parts of automobiles.

The implementation of stringent emission norms by several countries and regions is propelling the growth of the market. Reducing the vehicle weight is an important step to cut the emissions and, in turn, drives the original equipment manufacturers to opt for lightweight materials, such as magnesium and carbon fiber reinforced plastic, to manufacture vehicle components.

The increasing investment in innovation and automation, etc., is propelling the growth of the market studied. The ongoing research and development activities are leading to the discovery of new magnesium alloys and efficient manufacturing techniques. For instance, the Indian Institute of Technology, Madras, the US Army Research Laboratory, and the University of North Texas developed a new magnesium alloy that can replace aluminum and steel alloys in the automotive industry and increase the fuel efficiency of vehicles.

However, the growth of the market can be impacted by the high cost of magnesium and associated manufacturing processes and the ongoing impact of the COVID-19 outbreak.

Key Market Trends

Increased Application of Magnesium Die Casting in Body Parts

Key body structure applications, such as floor rails, shock towers, and pillars, are now being manufactured, using high-pressure non-ferrous castings. The use of magnesium in automotive body parts was limited earlier, but it has been observed to be expanding significantly since 2013. However, GM has been employing a single-piece die-cast roof frame made of magnesium, since the introduction of C-5 Corvette in 1997.

SUVs and Ford F-150 trucks make use of magnesium castings for radiator support, and Dodge few vehicle models use a one-piece magnesium front-of-dash magnesium die casting part. The first magnesium die-cast closure to ever meet 55 mph rear crash requirements is used in liftgate inner panel, and the part has been used initially in 2010 Lincoln MKT.

In Europe, for body panel applications, the German auto giants, Volkswagen and Mercedes, have employed thin-wall magnesium die castings.

Thin-wall die castings, such as closure inners, can often offset the material cost penalty of magnesium, over steel sheet metal construction, due to part consolidation. Thus, depending on the application and the area of employment, magnesium die casting components are gaining popularity within the body part segment, and their usage is expected to increase during the forecast period.

Asia-Pacific Projected to Dominate the Market During the Forecast Period

The large-scale demand, domestic production, government initiatives, and availability of resources are the main drivers for the growth of the Automotive Parts Magnesium Die Casting Market in the Asia-Pacific region.

China is one of the major producers of die casting parts and accounts for more than 64.90% of the regional (Asia-Pacific) die casting market share. The metal casting industry in China has more than 26,000 facilities, out of which 8,000 facilities produce non-ferrous castings. China produces over 49.3 million metric tons of castings. The advanced and efficient automatic die casting machines supported the demand for metal die castings in the country. Industrial restructuring, the upgrade of existing players, the development of the latest technologies, and improved production rates have contributed to the Chinese high-pressure die casting market’s growth. The Chinese magnesium die casting market experiences high demand from the automotive industry, which is rapidly growing at the international level. This is expected to drive the Chinese market’s growth over the forecast period.

India has the world’s second-largest foundry industry. Foundries in India can produce die casting products that serve a wide range of applications conforming to international standards. The Government’s focus on Make in India, developing the automotive industry, and the stringent emission norms are driving the market for automotive parts magnesium die casting in the country. The castings consumed by the automotive sector accounted for 35% of the country’s production. India witnessed a declining trend in passenger vehicle sales, owing to numerous reasons, such as economic slowdown, rise in fuel, and insurance costs. However, despite numerous pressures, such as revised axel norms and NBFC crisis, the overall commercial vehicle sales increased and showcased a robust 27.28% growth. Additionally, the increasing focus of central and state government on the usage of electric buses as a mode of urban transit, along with the drive to make transportation more sustainable, the demand for electric buses in the country is expected to accelerate, in turn, propelling the demand for magnesium die casted automotive parts in the country.

On the other hand, the growing automobile industry, stabilizing industrial sector, consumer popularity for fuel-efficient vehicles, and latest advancements in die casting techniques are expected to drive the growth of the Japanese automotive part magnesium die casting market. All these factors are expected to drive the automotive part magnesium die casting market’s growth in the Asia-Pacific region.

Competitive Landscape

The global automotive parts magnesium die casting market is highly fragmented with many regional small- and medium-scale players across both developing and developed countries around the world.

Major recognized players, such as Georg Fischer Automotive, Ryobi Die Casting, Shiloh Industries, and Pace Industries, accounted for over 28% of the overall global market share. Gibbs Die Casting Group, Sandhar Group, Sundaram Clayton Ltd, and Meridian Lightweight Technologies Inc, Dynacast (Form Technologies Inc.) are few other key players in the market.

These key players have focused their revenues on R&D to develop better production processes and alloys. This strategy may assist in the production of premium quality die-cast parts for the automotive industry. Key players have also expanded their reign globally by various mergers, expansions, partnerships, joint-ventures, and acquisitions.

For instance, in December 2019, Bharat Forge announced that it would break ground for its upcoming plant in North America in 2020. It is expected to be ready for production by about June 2021. The construction of its plant in Germany was completed, and soon, Bharat Forge will start trial production. The plant in Nellore, Andhra Pradesh, was expected to begin commercial production by December 2019. The first setup is with the die-casting machine, which can undertake both aluminum and magnesium casting on the same machines.

Key Topics Covered

1 INTRODUCTION
1.1 Study Assumptions
1.2 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET DYNAMICS
4.1 Market Drivers
4.2 Market Restraints
4.3 Industry Attractiveness – Porter’s Five Forces Analysis
4.3.1 Threat of New Entrants
4.3.2 Bargaining Power of Buyers/Consumers
4.3.3 Bargaining Power of Suppliers
4.3.4 Threat of Substitute Products
4.3.5 Intensity of Competitive Rivalry

5 MARKET SEGMENTATION
5.1 Production Process
5.1.1 Pressure Die Casting
5.1.2 Vacuum Die Casting
5.1.3 Gravity Die Casting
5.1.4 Squeeze Die Casting
5.2 Application
5.2.1 Body Parts
5.2.2 Engine Parts
5.2.3 Transmission Parts
5.2.4 Other Applications
5.3 Geography
5.3.1 North America
5.3.2 Europe
5.3.3 Asia-Pacific
5.3.4 Rest of the World

6 COMPETITIVE LANDSCAPE
6.1 Vendor Market Share
6.2 Company Profiles
6.2.1 Chicago White Metal Casting, Inc.
6.2.2 Sandhar Group
6.2.3 Georg Fischer AG
6.2.4 Gibbs Die Casting Group
6.2.5 Magic Precision Inc.
6.2.6 Meridian Lightweight Technologies
6.2.7 MORIMURA BROS. Inc.
6.2.8 Tadir-Gan Group (ORTAL Ltd.)
6.2.9 Pace Industries
6.2.10 Shiloh Industries Inc.
6.2.11 Sundaram-Clayton Limited
6.2.12 Twin City Die Castings

7 MARKET OPPORTUNITIES AND FUTURE TRENDS

For more information about this report visit https://www.researchandmarkets.com/r/ank47t

Research and Markets also offers Custom Research services providing focused, comprehensive and tailored research.

Media Contact:

Research and Markets
Laura Wood, Senior Manager
press@researchandmarkets.com

For E.S.T Office Hours Call +1-917-300-0470
For U.S./CAN Toll Free Call +1-800-526-8630
For GMT Office Hours Call +353-1-416-8900

U.S. Fax: 646-607-1907
Fax (outside U.S.): +353-1-481-1716

View original content:http://www.prnewswire.com/news-releases/automotive-parts-magnesium-die-casting-industry-forecast-to-2025-by-production-process-application-and-region-301121877.html

SOURCE Research and Markets